DPA FIDB00-M d:fine Headset Microphone Rental

fidb00-m
We offer DPA FIDB00-M d:fine Headset Microphone rentals in Chicago, the Chicago suburbs, and nationwide.

If you have any questions about a DPA FIDB00-M d:fine Headset Microphone rental in Chicago, suburban Chicago, or nationwide, or to reserve your rental, contact our Rental Team at 847.367.9588 or rentals@tcfurlong.com.

The DPA d:fine headset has the leading position when it comes to headworn microphones by combining absolute pristine audio quality with unique and simple mechanical solutions along side an extensive accessory line.

The d:fine has been ergonomically designed to fit easily and seamlessly. It will adjust to fit any ear size and head shape while mounting on either the left or right side of the head.

Just by rotating the boom, the microphone can be moved from left to right ear, or into the optimum position.

The d:fine directional rejects side and background noise while creating higher separation from nearby sound sources which improves the gain-to-feedback ratio and gives more channel control. Yet still, natural voice intelligibility is preserved along with its very high SPL capabilities one can both speak and sing with no hint of distortion. This is where the DPA d:fine is head and shoulders above its competition.

Intensive protection against pop/wind noise is integrated in the microphone design and windscreens are included. Also included is a capsule protection cap, a cable clip which anchors the cable to your clothing and a color coded cable clip offering easy recognition of a specific headset among many.

  • Directional characteristics:  Cardiod
  • Principle of operation:  Pressure gradient
  • Cartridge type:  Pre-polarized condenser
  • Frequency range:  20 Hz to 20 kHz
  • Frequency range, ± 2 dB:  100 Hz to 20 kHz with 3 dB soft boost at 8 to 20 kHz
  • Sensitivity, nominal, ± 3 dB at 1 kHz:  6 mV/Pa; -44 dB re. 1 V/Pa
  • Equivalent noise level, A-weighted:  Typ. 28 dB(A) re. 20 µPa (max. 30 dB(A))
  • Equivalent noise level, ITU-R BS.468-4:  Typ. 40 dB (max. 42 dB)
  • S/N ratio (A-weighted), re. 1 kHz at 1 Pa (94 dB SPL):  Typ. 66 dB(A)
  • Total Harmonic Distortion (THD):  <1 % up to 123 dB SPL peak; <1 % up to 120 dB SPL RMS sine
  • Dynamic range:  Typ. 95 dB
  • Max. SPL, peak before clipping:  144 dB
  • Output impedance:  From MicroDot: 30 til 40 ohm; from DAD6001-BC: 100 ohm
  • Cable drive capability:  Up to 300 m (984 ft) with DAD6001-BC XLR adapter
  • Output balance principle:  Signal balanced with DAD6001-BC XLR adapter
  • Common Mode Rejection Ratio (CMRR):  > 60 dB from 50 Hz to 15 kHz with DAD6001-BC XLR adapter
  • Power supply (for full performance):  Min. 5 V to max. 50 V through DPA adapter for wireless systems; 48 V phantom power ± 4 V with DAD6001-BC XLR adapter
  • Current consumption:  Typ. 1.5 mA (microphone). 3.5 mA with DAD6001-BC XLR adapter

TC Furlong offers DPA FIDB00-M d:fine Headset Microphone rentals alongside hundreds of microphone rentals and an extensive rental inventory of professional audio equipment.

Contact the TC Furlong Rental Team today to rent the DPA FIDB00-M d:fine Headset Microphone in Chicago, Suburban Chicago, or nationwide, at 847.367.9588 or rentals@tcfurlong.com.

DPA FIDB00-M d:fine Headset Microphone Rental Documentation:

DPA FIDB00 Rental Manual