Meyer Sound MM-4XP Loudspeaker Rental
We offer Meyer Sound MM-4XP rentals in Chicago, the Chicago suburbs, and nationwide.
If you have any questions about a Meyer Sound MM-4XP loudspeaker rental in Chicago, suburban Chicago, or nationwide, or to reserve your rental, contact our Rental Team at 847.367.9588 or rentals@tcfurlong.com.
The Meyer Sound MM-4XP is just one of many loudspeakers in our rental inventory.
The Meyer Sound MM-4XP loudspeaker is a very compact, wide-range loudspeaker for high quality distributed system applications. In contrast to conventional low power 70-volt transformer based systems, the MM-4XP connects directly to the amplifier and is capable of producing high sound pressure levels while dramatically reducing distortion and easing installation requirements.
The MM-4XP comprises a single 4-inch cone driver with a 16-ohm voice coil mounted in a sealed enclosure. The MM-4XP draws 150 watts peak from the line, and produces 112.5 dB peak SPL. Typically, with four MM-4XPs connected in parallel on the line, the system requires a direct drive power amplifier capable of 600 watts continuous output (49 volts rms) into 4 ohms.
The MM-4XPCEU is a two-channel, single rack space unit providing frequency and phase response correction circuitry tailored to the MM-4XP loudspeaker. Through a SpeakerSense connection to the power amplifier output, the MM-4XPCEU continuously monitors the power applied to the drivers, activating integral peak and RMS limiters to protect against over-excursion and overheating, respectively.
The MM-4XPCEU incorporates Meyer Sound’s MultiSense circuit to drive several amplifiers, monitor two amplifier channels and activate its protection circuits based on the system branch with the highest signal level. MultiSense allows the levels of individual zones to be adjusted using the power amplifier’s attenuators. Typically, each channel of the MM-4XPCEU can drive 12 or more amplifier channels depending on the input impedance of the amplifier.
The MM-4XP enclosure’s black anodized extruded aluminum acts as a sink to dissipate heat from the driver voice coil. It can be ordered custom-painted to match décor, and is fitted with a perforated steel grille.
Two connector versions are available: the sealed EN3 connector for outdoor installations, and a Phoenix-style keyed connector for use indoors. A companion MUB-MM4 U-bracket is available for mounting that affixes to the cabinet with two 3/8″-16 screws and is drilled to fit an OmniMount bracket. An optional MMFA-MM4 flush mount assembly is available for ceiling or wall mount applications.
- Output- 220 W (440 W peak)
- Operating frequency range- 120 Hz – 18 kHz
- Coverage pattern- 80 degrees symmetrical
- Extremely compact enclosure
- Self-powered
- Wide-range frequency response at ultralow distortion
- High speech intelligibility, and punch and bandwidth for music
- Amazing SPL/size ratio
- Enables runs of hundreds of feet of light-gauge cable
TC Furlong offers Meyer Sound MM-4XP loudspeaker rentals alongside many other loudspeakers and an extensive rental inventory of professional audio equipment.
Contact the TC Furlong Rental Team today to rent the Meyer Sound MM-4XP loudspeaker in Chicago, Suburban Chicago, or nationwide.
Meyer Sound MM-4XP Rental Documentation: