Loftech TS-1 Sine Wave Generator Rental

Loftech TS1 image 2We offer Loftech TS-1 Sine Wave Generator rentals in Chicago, the Chicago suburbs, and nationwide.

If you have any questions about a Loftech TS-1 Sine Wave Generator rental in Chicago, suburban Chicago, or nationwide, or to reserve your rental, contact our Rental Team at 847.367.9588 or

The Loftech TS-1 Sine Wave Generator is just one of many pieces of audio testing equipment in our rental inventory.

General specifications for the TS1:

  • Display: 4 digit via 7 segment LEDs.
  • Connectors: TS1 – ¼” phone jack (TSR).
  • Power Requirements: 115Vac @ 60Hz (50Hz internally strappable), 220Vac available
  • Approvals: – CE Mark
  • Emissions: – EN 55022 B – FCC Class B
  • Immunity: – EN 55024 B
  • Size (W x H x D); Weight: 7-7/8″ x 2-5/8″ x 7″; 2 lbs.
  • Case Material: High impact ABS; Front & Rear Panels: Painted aluminum.

The Low Distortion Oscillator:

A current controlled, state-variable true sine wave oscillator incorporating a fast AGC circuit. Distortion components are typically 0.1% 2nd and 0.05% 3rd which are low order and not audible making the TS1 useful in making listening tests where a function generator would generate undesirable, audible side effects. Full frequency sweeps can be made from 20Hz – 20kHz in a single range. This unit has no amplitude changes over the entire frequency range.

  • Frequency range: 10Hz – 30kHz
  • Accuracy: ± 0.1dB from 20Hz – 20kHz.
  • Output impedance: 50 ohm unbalanced. Optional balanced available.
  • Adjustable output level: -70dBv to +18dBv ref: (0.775V)
  • Maximum output level: +18dBv @ 2k ohm or greater, +16.5dBm @ 600 ohms.
  • Distortion: < 0.3% THD

The Frequency Counter: 

The frequency counter is internally connected to the internal oscillator and displays the oscillator frequency until a signal is plugged into the input connector. It then displays the frequency of the input signal. This unique combination allows absolute precision in setting frequencies.

  • Frequency response: 1Hz – 99.99kHz
  • Input impedance: > 100k ohms (electronically balanced).
  • Input level: -40dBv to +24dBv ref: (0.775V)

The dB Meter:

The dB meter is a wideband average responding AC voltmeter. The circuit output is converted to dB for display. Direct reading dB greatly simplifies alignment procedures.

  • Meter Range:.. -50dBv to +24dBv ref: (0.775V)
  • Accuracy: ±0.1dB from 20Hz – 20kHz @ 0dBv
  • ±1.5dB from 20Hz – 20kHz @ 50dBv
  • Adjustable zero reference: -10dBv to +8dBv (rear panel adjustment)

TC Furlong offers Loftech TS-1 Sine Wave Generator rentals alongside  many other pieces of audio testing equipment and an extensive rental inventory of professional audio equipment.

Contact the TC Furlong Rental Team today to rent the Loftech TS-1 Sine Wave Generator in Chicago, Suburban Chicago, or nationwide, at 847.367.9588 or

Loftech TS-1 Sine Wave Generator Rental Documentation:

Loftech TS-1 Rental Spec Sheet (PDF)